PULLEY DRIVE FANS

- Double-inlet or simple-inlet multiblade fan for drive operation.

- M.T. series attachment by support legs.
- Housing and turbine made of galvanized iron.
- Bearings support mounted on two inlets by rivets in M.T. and M.T.C. Series. In M.T.R. Series, mounted on U-section welded to main frame.
- Flows rates of up to 55.000 m 3 /h.
- Pressures of up to 90 mm. c.a.
- Maximum operating temperature: 70º C.

Submodels

MT FAN

- Double-inlet multiblade fan for drive operation.
- Several models (from MT-9/9 to MT-18/18) are available.
- Flows rates up to 15000 m3/h.

MTC FAN

- Double-inlet multiblade cubic fan for drive operation.
- Several models (from MTC-10/10 to MT-18/18) are available.
- Flows rates up to 15000 m3/h.

MTR FAN

- Double-inlet multiblade fan for drive operation.
- Several models (from MTR-20/20 to MTR-30/28) are available.
- Flows rates up to 35000 m3/h.

MSO FAN

- Multiblade single-inlet fan for drive operation.
- Housing and turbine made of galvanized iron plate.
- Permanently lubricated, self-aligning ball bearings.
- In models 10/5 12/6 15/7,5 18/9 bearings are fastened to metal side by means of nuts and bolts. In models 22/11 25/12,5 30/14 cast iron supports attached to U-section electrically welded onto housing.
- Flow rates up to 35.000 m 3 /h.
- Pressures up to 130 mm. c.a.
- Capable of continuous operation at high temperatures-up to 100ºC. Can withstand higher temperatures for short periods.

MSO 400ºC / 2H FAN

- Multiblade single-inlet fan for drive operation.
- Housing and turbine made of galvanized iron plate.
- Certified 400ºC / 2H.
- Flows rates up to 35000 m3/h.
- Several model are available: 10/5, 12/6, 15/7.5, 18/9, 22/11, 25/12.5, 30/14.

MT 400ºC / 2H FAN

- Double-inlet multiblade fan for drive operation.
- Housing and turbine made of galvanized iron plate.
- Flows rates up to 35000 m3/h.
- Several model are available: 10/10,12/12, 15/15, 18/18, 20/20, 22/22, 25/25, 30/28.
- Certified 400ºC / 2H.
- The longer impeller shaft allows the transmission pulleys and belts to be installed out of the fan box, thus away from the hight temperature area.